How to remove mold and stains from ceramic tiles 

Last Updated on April 1, 2024 by Ali Hamza

There are no better options than ceramic tiles if you’re looking to create kitchen floor or bathroom walls that look stunning, but maintaining them on top in all seasons isn’t an easy task. Suppose your ceramic tiles begin showing early indications of mold and stains, or you’re trying to give new life to older ceramic tiles. In that case, We have various suggestions and tricks that will help you eliminate the stains and prevent them from occurring later on. First, let’s look at why ceramic tiles are susceptible to mold and stains, and we’ll tell you, it’s not your fault! And, you can locate the tile cleaning services near me.

What causes stains and the growth of mold?

Whatever frequency you clean, stains or molds are still likely to show up on your tiles because a variety of bacteria causes them. Some various reasons microbes cause staining could begin to develop on your ceramics, such as the increase in temperature of your room that causes humidity and water that bacteria thrive on, and spills from food or drinks leave microbes behind countertops and ceramic floors. The truth is, bacteria are everywhere around us, and preventing them from coming into contact with your porcelain is virtually impossible. Eliminating it before it causes molds and stains is the best method to keep your tiles looking gorgeous for longer.

How can you avoid staining ceramic tiles used in the kitchen?

The steps below will assist you in avoiding the formation of stains on ceramic tiles in the kitchen area:

Make sure to clean your tiled floor at least once per week using hot water. Clean off any spills of food or drinks as fast as possible to stop them from spreading, and, ideally, clean the surfaces using an antimicrobial cloth afterward.

If you’ve got stains or molds that cannot be removed, you can mix half 1 cup of vinegar and one gallon of water. Then keep mopping the floor in the same way as you normally do. Clean the floor using warm water after you have removed the stain. Then, take the liquid off your tiles. The same result can be achieved by cleaning ceramic tiles for walls and ceramic countertops for kitchens.

How to prevent stains from ceramic tiles in bathrooms

Following these four steps can help you avoid the appearance of mold and stains on your bathroom’s ceramics:

· Make sure that the room is well-ventilated. Bathroom fans are ideal for this because they can stop the space from becoming moist, and that’s exactly what bacteria like.

· Clean the ceramics at least every week using a special cleaning product to ensure that stains and molds do not grow.

· If you’ve found mold on your bathroom tiles that you cannot remove first, make sure you’ve ventilated the bathroom because the high humidity level makes mold nearly impossible to eliminate. Cleaning the tiles using an already-made solution consisting of 10 percent bleach and 90% water will remove all of them.

· For stains that are particularly difficult to remove, you can mix the solution that contains 25 75% bleach and 25 percent baking soda in one cup. Make sure to try your solution with a tiny area of the tile before you attempt to clean this stain

The use of antimicrobial-protected ceramic tiles can aid

If our advice in the past may seem like an overwhelming task, there is a simpler approach. There are ceramic tiles available with an antimicrobial coating intended to prevent the growth of staining and mold-causing microbes that can be found on their surfaces. This protection is in place at the production time and doesn’t wipe off or removed. There are many designs and styles of antimicrobial ceramic tiles, including those of Daltile and Corona. Since the technology can prevent the development of stain – and mold-causing microbes in your ceramic, your tiles will remain clean for longer, and stains and molds are much less likely to happen.

How Antimicrobial-Protected can ceramic Tiles Help Keep Your Home Clean?

Ceramic tiles are a popular choice for kitchens and bathrooms but can be difficult to maintain. Stains and mold are common problems that make your tiles look old and dingy. However, there is a solution: antimicrobial-protected ceramic tiles.

Antimicrobial-protected tiles are designed to prevent the growth of stain- and mold-causing microbes on their surfaces. This protection is applied during production and doesn’t wear off or wash away. Many manufacturers, such as Daltile and Corona, offer a variety of designs and styles of antimicrobial ceramic tiles.

Regular and thorough cleaning is still important to keep your ceramic tiles looking their best. Wipe your tiles clean with hot water at least once a week, and clean up spills as soon as possible to prevent stains from setting in. If you encounter tough stains, mix one cup of vinegar with one gallon of water and mop the floor. For bathroom tiles, ensure the room is well-ventilated and use a cleaning product specifically designed for ceramics. If you encounter mold that won’t come off, use 10 percent bleach and 90 percent water.

With the help of antimicrobial-protected ceramic tiles, you can keep your home looking clean and fresh for longer.

How to maintain the shine and durability of granite countertops?

Granite countertops are an investment in your home’s beauty and functionality. However, they can be prone to stains, scratches, and other forms of damage if not properly maintained. Fortunately, with the right care and attention, granite countertops can last for years and maintain their shine and durability.

One of the essential steps in maintaining granite countertops is proper cleaning. You should wipe down your countertops daily with a soft cloth and a gentle, pH-neutral cleaner. Avoid using harsh chemicals, abrasive scrubbers, or acidic cleaners, as they can damage the surface of the granite. Instead, use warm water and mild soap to clean up spills and stains, and dry the surface with a soft towel.

Another important aspect of granite countertop maintenance is protecting them from scratches and other forms of damage. You can do this by using cutting boards and trivets to prevent direct contact between the granite and knives, hot pots, and other sharp or hot objects. Be sure to wipe up spills and crumbs promptly to avoid leaving any residue on the surface that could cause scratches or stains.

Finally, you can help maintain the shine and durability of your granite countertops by having them professionally sealed every one to two years. Granite is a porous stone that can absorb liquids and stains if not sealed properly. A professional granite sealing service will help protect your countertops from damage and keep them looking new for years to come.

With proper care and attention, your granite countertops can remain beautiful and functional for years. Follow these simple tips for cleaning, protecting, and sealing your granite countertops, and enjoy the elegance and durability of this timeless natural stone.


The most important thing to keep your ceramic tiles free from stains and mold is a regular and thorough cleaning. Just wiping your ceramics clean frequently with hot water could suffice; however, use specific cleaning products or ceramic tiles with antimicrobial protection to tackle tough stains.

Read More: Some different types of metal tiles for the roof of the house

Related Articles

Back to top button